Yüksek Sıcaklık Mikrodalga Kül Fırını

NBD-MWB-1700IT High Temperature Microwave Muffle Furnace Introduction

NBD-MWB-1700IT High Temperature Microwave Muffle Furnace is a high temperature microwave sintering system, which can achieve a maximum working temperature of 1550℃.

NBD-MWB-1700IT High Temperature Microwave Muffle Furnace Application

NBD-MWB-1700IT High Temperature Microwave Muffle Furnace is mainly used for high-temperature synthesis, sintering, incineration, melting and heat treatment on various inorganic materials under air atmosphere.

■ Synthesis of inorganic powder:

Electronic ceramic powders: barium titanate, barium-strontium titanate, strontium titanate, barium zirconate titanate;

Lithium ion battery anode materials: lithium cobaltoxide, lithium manganate;

Various colorants, glaze material, inorganic pastel;

Other inorganic powder: mangano-manganic oxide, zinc ferrite, Tri-chromatic rare earth fluorescent powder (Red), glass, cement;

■ Sintering of electronic ceramics: piezoresistive element, thermistor, piezoceramics, microwave medium ceramics;

■ Sintering of oxide ceramics and refractory materials: alumina, zirconia, magnesium oxide and other oxide composites;

■ Sintering of magnetic materials: Ni-Zn ferrites, gyromagnet ferrites;

■ Incineration, cremation, scaling loss experiments.

NBD-MWB-1700IT High Temperature Microwave Muffle Furnace Parameters

• Overall size: 750mmL×740mmW×665mmH
• Effective working zone: 150mmD×140mmW×110mmH
• Power supply: AC 220±10 V, 60Hz
• Rated electric power: <3kW
• Maximum working temperature: 1550℃
• Temperature measuring: IR pyrometer
• Temperature measuring range: 250℃~1650℃
• Microwave output power: 0.2~1.4kW adjustable
• Microwave frequency: 2.45GHz ± 25MHz
• Cooling water flow: ≥0.6m³/h
• Cooling water pressure: ≥0.08MPa
• Cooling water inlet temperature: 5~30℃
• Cooling water hardness: <60mg/L (tap water is OK)
• Microwave leakage level: <2mW/cm²